FJORDEN GRIP QUICK START GUIDE

Simulan ang pagbaril gamit ang Fjorden Grip sa loob ng isang minuto!
Panoorin ang video o sundin ang mga hakbang sa ibaba.

  • The Fjorden Grip contains a 3V CR2032 coin cell.
  • Remove and immediately recycle or dispose of used batteries according to local regulations and keep away from children.
  • Do NOT dispose of batteries in household trash or incinerate. Even used batteries may cause severe injury or death.
  • If ingested, call a local poison control center for treatment information (1-800 498-8666). Non-rechargeable batteries are not to be recharged. Do not force discharge, recharge, disassemble, heat above 60'c, or incinerate. Doing so may result in injury and/or chemical burns due to venting, leakage or explosion resulting in chemical burns.
  • Always completely secure the battery compartment. If the battery compartment does not close securely, stop using the product, remove the batteries, and keep them away from children.
  • When replacing the coin cell battery, ensure it is installed correctly according to polarity (+ and -), with the + side facing up. Do not mix old and new batteries, different brands, or types of batteries, such as alkaline, carbon-zinc, or rechargeable batteries.
  • Remove and immediately recycle or dispose of batteries from equipment not used for an extended period of time according to local regulations.
  • Always completely secure the battery compartment. If the battery compartment does not close securely, stop using the product, remove the batteries, and keep them away from children.

Hakbang 1

Una, i-download at i-install ang Fjorden Camera app.

Kapag na-install na, buksan ito at sundin ang mga tagubilin sa onboarding sa screen.

I-download ang Fjorden Camera

Hakbang 2

Hilahin ang tab na papel na nakadikit sa tray ng baterya mula sa ibaba ng iyong bagong Fjorden Grip.

Pagkatapos mong alisin ang tab na papel, pindutin nang dahan-dahan ang tray ng baterya upang matiyak na mananatiling flush ito sa grip.

Hakbang 3

Pagkatapos ay simulan ang proseso ng pagpapares sa pamamagitan ng pag-tap sa “ Pair My Grip ” mula sa onboarding screen o sa pamamagitan ng pag-access sa Mga Setting ng Grip mula sa pangunahing view ng app.

Hakbang 4

I-scan ang QR code sa likod ng iyong Grip o manu-manong ilagay ang Serial Number.

Hakbang 5

Pindutin nang matagal ang Shutter Button at Function Button sa Fjorden Grip, hanggang sa magsimulang kumurap ang Status LED (~5 segundo). Ang pangalan ng iyong Fjorden Grip ay dapat lumabas sa app.

Hakbang 6

I-tap ang + button sa sandaling lumitaw ang iyong Fjorden Grip sa screen ng Pagpapares. Ang iyong Grip ay dapat na ngayong ipares sa Fjorden Camera app!

Ang iyong mahigpit na pagkakahawak ay handa nang bumaril!

Masiyahan sa iyong unang #ShotOnFjorden !

Mag-scroll pababa upang matutunan kung paano gamitin ang Fjorden Grip o bisitahin ang aming Help Center kung mayroon kang anumang mga tanong tungkol sa alinman sa aming mga produkto.

Pangkalahatang-ideya ng Fjorden Grip

Mag-scroll pababa upang malaman ang higit pa tungkol sa paggamit ng Fjorden Grip o panoorin ang Ultimate Guide to Fjorden sa ibaba.

1. Two-Stage Shutter Button
2. Nako-customize na Control Dial
3. Multi-Function na Pindutan
4. Zoom Lever
5. Quick-Release Button

6. Mekanismo ng pag-mount
7. QR Code at Serial Number
8. Status LED

9. Tray ng Baterya

Paano i-mount ang Fjorden Grip

Gumamit ng alinman sa Fjorden MagSafe Case (A) o ang kasamang Universal Adapter (B) para i-mount ang Grip sa iyong iPhone.

First, insert your iPhone into the Fjorden MagSafe Case.

Then align the Quick Release Button with the mounting point on the case and press gently until the Grip clicks in place.

If you don't have a Fjorden MagSafe case, use the included Adapter Plate:

• Make sure the surface is thoroughly clean and dry before applying the adapter plate.
• Peel off the protective cover from the adapter
• Stick it on the lower half of your iPhone or existing case.
• Then align the Quick Release Button with the mounting point on the adapter and press gently until the Grip clicks in place.

Paano gamitin
ang Fjorden Grip

Hawakan ito na parang DSLR

Sa naka-mount na Fjorden Grip, maaari mong sa wakas ay hawakan ang iyong iPhone tulad ng isang tradisyonal na camera kapag kumukuha ka ng mga larawan.

Kumuha ng litrato

Pindutin nang kalahati ang Shutter Button upang i-lock ang focus sa isang paksa.

Pindutin nang buo ang Shutter Button nang buo upang kumuha ng larawan.

Baguhin ang posisyon ng focus point sa pamamagitan ng pag-tap kahit saan sa Viewfinder.

Ayusin ang Exposure

I-rotate ang Control Dial pakaliwa o pakanan para isaayos ang value ng isang parameter. Ang kasalukuyang napiling parameter ay ipinahiwatig ng dilaw na dial.

Pindutin ang Control Dial para magpalipat-lipat sa pagitan ng mga adjustable na parameter (Exposure Compensation, Shutter Speed, ISO o White Balance)

Mag-zoom in at Out

Hilahin ang Zoom Lever nang dahan-dahan pakanan para mag-zoom in.

Itulak ang Zoom Lever nang dahan-dahan pakaliwa upang mag-zoom out.

I-flick ang Zoom Lever upang mabilis na lumipat sa pagitan ng mga lente ng iyong iPhone.

Pindutin ang Function Button upang lumipat sa camera na nakaharap sa harap.

I-customize ang Fjorden Grip

Maaari mong i-customize ang functionality ng Control Dial at Function Button mula sa Grip Settings sa loob ng Fjorden Camera.

Ang Fjorden Grip ay kailangang konektado sa iyong iPhone.

Naka-on/NAKA-OFF

Ang Fjorden Grip ay awtomatikong mag-o-off pagkatapos ng 5 minutong hindi aktibo.

Pindutin ang Shutter Button para i-on itong muli.

Bisitahin ang aming Help Center

Kung mayroon kang anumang hindi nasagot na mga tanong tungkol sa Fjorden Grip o sa Fjorden Camera app, mangyaring bisitahin ang aming Help Center o makipag-ugnayan sa bilang sa hello@fjorden.co.